Directly form factory and manufacture
LED have wave sensor strips
Features
※Hand wave switch
※Linear brightness dimmable
※Right angle connector cross connector,you can connect what you want
※Simple and easy to install
Specification:
① Turn down/turn off:
The light is off after connect the power supply. When the hand wave from the inducing area(vertical dimension 1-8cm),the light is turn on. And wave again, the light is turn down.
② Brightness adjustment:
The brightness of light could be adjusted freely from 8% to 100%.
When the hand stay on the inducing area above, the light will get dimmer until minimum 8% brightness(Assuming the brightness of the light is 100%). And the hand stay on the inducing area above again, the light will get brightness until 100%. You can leave your hand when get you wanted brightness also.
Product Parameters
LED Type |
SMD2835 |
SMD2835 |
LED Qty/M |
60 |
60 |
Wattage/M (W) |
4.8W/M |
4.8W/M |
Light Angle |
120° |
120° |
CCT(K) |
2700K/4000K/6000K |
2700K/4000K/6000K |
Lumens (lm/M) |
350±10% |
350±10% |
CRI (Ra) |
>80 |
>80 |
Strips length |
3M |
5M |
IP Rating |
IP65 |
IP65 |
Dimmable |
YES |
YES |
EJ-LHSS01-150: 1. LED Strips length: 150CM*1PC
2. Adapter 1A*1PC
3. 1PC Hand wave sensor
4. Blister packing
EJ-LHSS01-300: 1. LED Strips length: 300CM*1PC
2. Adapter 1.5A*1PC
3. 1PC Hand wave sensor
4. Blister packing
EJ-LHSS01-500: 1. LED Strips length: 500CM*1PC
2. Adapter 12*1PC
3. 1PC Hand wave sensor
4. NO Blister packing, anti-static bag